| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| Changing servo from 1520us to 720us https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=5628 |
Page 1 of 1 |
| Author: | Samjillians [ Tue 11. Apr 2023 9:03:58 ] |
| Post subject: | Changing servo from 1520us to 720us |
Hi all, I’m about to change my servo pulse to 720us. Does anybody know of all of the subtrims have to be reset after doing this? I.e redo the FBL setup process for a level swashplate, 0 degrees and 6 degrees geometry. |
|
| Author: | ZeXx86 [ Tue 11. Apr 2023 13:21:33 ] |
| Post subject: | Re: Changing servo from 1520us to 720us |
Hi, it might be needed to adjust again: 1. all servo subtrims 2. all servo limits 3. Geometry 6° Adjustments must be done in this order. It is very dependent on servos, but there is possibility there will be difference. |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|