| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| Telemetry Values Kontronik Jive Pro with GTR https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=5546 |
Page 1 of 1 |
| Author: | tahuata [ Wed 01. Feb 2023 10:43:29 ] |
| Post subject: | Telemetry Values Kontronik Jive Pro with GTR |
Hello, connecting a Jive Pro 120+ to the GTR Unit with the Master Cable set to THR and the Slave Cable set to E1 (configured to EX Bus) I get all Spirit Telemetry Values on my DC-24 Transmitter but they all show 0, except the Altitude. Here the readout shows correct Values. Do I need the "Spirit Telem Kontronik V2 Cable" to connect the Jive Pro to the SAT1 Port or is there another way without that Cable ? Thanks for Support... Heiko |
|
| Author: | ZeXx86 [ Wed 01. Feb 2023 11:04:14 ] |
| Post subject: | Re: Telemetry Values Kontronik Jive Pro with GTR |
Yes, the cable is needed. Please see our guide: https://manual.spirit-system.com/index. ... _Telemetry Other way is to buy Kontronik JETI TelMe module which is few times more expensive. |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|