Spirit System
https://www.spirit-system.com/phpBB3/

Spirit Internal Governor with HW V5
https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=5515
Page 1 of 1

Author:  pb3d [ Mon 26. Dec 2022 15:20:16 ]
Post subject:  Spirit Internal Governor with HW V5

I am using HW Platinum Pro150a V5 and Scorpion HKIV-4025/1100kv, with Spirit GT, Rx AR6610T and TX DX8 G2 to fly SAB Raw 700 Piuma.

I have problem with tail blowouts during inverted flips. The flight log shows drops of 300 PRM (from 1,650 to 1,350 RPM) and a drop of the battery voltage 6-7V. Therefore, I wanted to switch to the internal governor. But, after I set the ESC governor at "Linear Throttle" and enable the internal governor, I get only constant high RPMs of about 2,000, which do not change with different flight modes.

Apparently, there is something wrong with my setup, assuming that HW V5 is supported by the latest Spirit firmware. Any idea as how to resolve this?

Thanks
PB

Author:  ZeXx86 [ Tue 27. Dec 2022 21:30:26 ]
Post subject:  Re: Spirit Internal Governor with HW V5

Hello,

I replied on facebook to your message.

Page 1 of 1 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/