| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| Flybar mode https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=5504 |
Page 1 of 1 |
| Author: | UpAndDown [ Thu 08. Dec 2022 21:01:41 ] |
| Post subject: | Flybar mode |
Hi there, I am happy about the new Spirit System 2, though there is a question I have about the normal flight mode, i.e. no stabilization and no recovery activated. I am flying a helicopter with flybar, and for that reason I bought the Spirit System, because it supports it, another reason is I want to have a rescue function. So, rescue and stabilization a working fine, but in the normal flight mode there is also some stabilization applied. What I mean is: if the helicopter mechanically nicks or rolls (without touching the control sticks), the swashplate moves to the opposite direction of that movement for a few seconds while it gradually returns to its normal position (parallel to the landing gear). What I expected is that the swashplate would not move at all as long as there is no stick input on the remote, regardless of whatever the helicopter does. I see that this small stabilization is required if the model is flybarless, but here we do have a flybar, and I have ticked the respective option in the menu (and saved that setting). I have also checked in the diagnosis tab that indeed rescue and stabilizatition are both disabled. So, long text short: can this stabilization effect in normal flight mode be disabled at all for the flybar setting, or at least be reduced by any setting? Thank you for your answer |
|
| Author: | ZeXx86 [ Fri 09. Dec 2022 9:31:48 ] |
| Post subject: | Re: Flybar mode |
Hello, it can be reduced by changing Geometry 6 degrees to the lowest value. However it will be always enabled to some extent to make the flight more stable and precise. |
|
| Author: | Habásek [ Fri 09. Dec 2022 9:50:30 ] |
| Post subject: | Re: Flybar mode |
Wouldn't it help reduce the cyclical gain? |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|