Spirit System https://www.spirit-system.com/phpBB3/ |
|
Geolink on Oxy3 https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=5491 |
Page 1 of 1 |
Author: | ZeXx86 [ Mon 28. Nov 2022 20:45:46 ] |
Post subject: | Re: Geolink on Oxy3 |
Hello, manual says at least 50 mm from a servo. However this might be still not enough. Features such as Altitude Limit, Altitude Hold will work in any case. You can at least try the performance. Without checking it is hard to say. |
Author: | Uplate [ Mon 28. Nov 2022 21:00:26 ] |
Post subject: | Re: Geolink on Oxy3 |
Thank you Tomas. I stand corrected on distance. We moving it that far back is really going to affect CG. Will try it out. Anybody using them on 300 size machines? Coming to visit your beautiful country in a week. |
Author: | Pking [ Tue 29. Nov 2022 19:09:22 ] |
Post subject: | Re: Geolink on Oxy3 |
Uplate wrote: Thank you Tomas. I stand corrected on distance. Hi,We moving it that far back is really going to affect CG. Will try it out. Anybody using them on 300 size machines? Coming to visit your beautiful country in a week. I am using Geolink on a Sab Fireball (280) and it helps tremendously in keeping the heli intact…. I use RTH, geofencing and rescue. I use less often altitude limit and it works well. I would have made a lot of repairs even rekit without Geolink… Enjoy Pierre |
Author: | Uplate [ Tue 29. Nov 2022 19:40:16 ] |
Post subject: | Re: Geolink on Oxy3 |
Thank you Pierre. Do you have CG issues? |
Author: | Pking [ Tue 29. Nov 2022 21:43:14 ] |
Post subject: | Re: Geolink on Oxy3 |
Uplate wrote: Thank you Pierre. Hi Uplate, Do you have CG issues? I do have a small CG issue but I don’t really care it’s really a heli to learn and throw around to get better to fly my bigger heli. |
Page 1 of 1 | All times are UTC + 1 hour |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |