| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| Telemetry sesnsor - explain values https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=5477 |
Page 1 of 1 |
| Author: | Dudemeister [ Thu 17. Nov 2022 8:31:53 ] |
| Post subject: | Telemetry sesnsor - explain values |
I'm still trying to get a grip on what some of telemetry sensors actually tell me. On a Spirit GT / Castle Edge ESC / FrSky ACCST 2 RX I get the following: RX ?? RxBatt Receiver / BEC Voltage Fuel Vibrations ADC2 ?? RBOX V1 Main Battery Voltage RBOX A1 Main Battery Amperage?? VFR VFR RBOX C1 ?? RBOX C2 ?? TEMP 1 ESC Temperature GPS Alt Altitude (Seems t work without GeoLink. Barometer in the Spirit GT?) RPM RPM I'm interested in getting more info on the sensors with ??. Also, The RBOX A1 is a Amp erage display. But what is it supposed to show, the total battery capacity, the rema ining capacity? Also, what the difference between RSSI and VFR |
|
| Author: | Dudemeister [ Fri 18. Nov 2022 18:42:21 ] |
| Post subject: | Re: Telemetry sesnsor - explain values |
I'm running this on a FrSky X20S with Ethos, and assuming this is similar to the OpenTX integration Telemetry, then I think some of the questions are answered RX = ?? RxBatt = Receiver / BEC Voltage Fuel = Vibrations ADC2 = ?? RBOX V1 = Main Battery Voltage RBOX A1 = Main Battery Amperage (Is this a value that's calculated or manually entered? IS it the battery rated capacity?) VFR = VFR RBOX C1 = Battery Consumed Capacity (in mAh) RBOX C2 = BEC Voltage x10?? IS this the same as RxBatt? TEMP 1 = ESC Temperature GPS Alt = Altitude (Seems to work without GeoLink. Barometer in the Spirit GT?) RPM = RPM |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|