| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| selecting Stabi modes with separate channel https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=5423 |
Page 1 of 1 |
| Author: | Carthago [ Mon 10. Oct 2022 16:58:27 ] |
| Post subject: | selecting Stabi modes with separate channel |
Hello, I have some questions about the stabi modes when using a "separate channel". If I understand that correctly, then I can, for example, assign "Rescue normal" to one channel and "Stabilization normal" to another channel. Assigning "Stabi Function" to a channel and thus activating it is apparently no longer necessary. Can I then theoretically assign stabilization Acro, Scale and Coaxial to other channels and how can I prevent this from getting in the way? Unfortunately, there seems to be no way to put multiple modes on a 3-position switch, for example. When using a separate channel for the stabi functions, is it possible to make different assignments in each bank - e.g. I am switching the banks when changing the flight phases? Thanks and best regards, Toni |
|
| Author: | ZeXx86 [ Wed 12. Oct 2022 18:09:46 ] |
| Post subject: | Re: selecting Stabi modes with separate channel |
Hello, yes, you can assign any Stabilisation or Rescue mode - all can be independently controlled with individual channels. It is enough to set F: Stabilisation or F: Rescue in the Channels window and assign channels to them. Stabi/Function must be set to Selected by Channel. If you want more features with a single channel, then you can use Bank Switching and set Stabi/Function for each bank differently. You can even turn these functions on/off if you will use F: Stabi Function with other channel. |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|