| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| [SOLVED] Radio and Servo reversing - How-To https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=5398 |
Page 1 of 1 |
| Author: | Bladecrasher [ Thu 22. Sep 2022 2:43:59 ] |
| Post subject: | [SOLVED] Radio and Servo reversing - How-To |
Every time I need to get my DX9 setup with a new model - I have to F..K around with the reversing on the TX and Spirit before the swash is moving correctly. This is such a BS problem, there must be a step-by-step "how-to" explanation of getting this resolved. Does anyone have a link to something helpful or an explanation of the process of elimination. The manual seems useless for this. Thank you, |
|
| Author: | ZeXx86 [ Thu 22. Sep 2022 8:56:36 ] |
| Post subject: | Re: Radio and Servo reversing - How-To |
Hello, there are only two steps that you have to do in regards to reversing. 1. Reverse radio channels according Diagnostic tab/Setup wizard and from then never touch these reverses. 2. Reverse servos in the Servos tab/Setup wizard to achieve correct movements. It is enough to move with pitch stick up and down and reverse all servos that are moving in a wrong direction. Then you are done. If you are using a digital channel transmission protocol such as Spektrum DSM2/X or SRXL2 (no PWM or PPM) then point 1 will be correct out of the box. So then no reversing in your radio is needed at all. In other words it is enough to proceed according Setup Wizard. |
|
| Author: | Bladecrasher [ Fri 23. Sep 2022 13:30:15 ] |
| Post subject: | Re: Radio and Servo reversing - How-To |
Thank you. Re-doing the Wizard made this easy. |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|