It is currently Wed 25. Sep 2024 17:34:33

All times are UTC + 1 hour





Post new topic Reply to topic  [ 2 posts ] 
  Print view Previous topic | Next topic 
Author Message
 Post subject: Suggestion
PostPosted: Mon 06. Apr 2015 12:15:59 
Offline

Joined: Fri 24. Oct 2014 20:57:19
Posts: 50
Hi Guy's
I realize you Spirit guys are busy but i have a suggestion.

I have 3 Spirit System and had my first around 5 months ago, generally im impressed with the system but im struggling to resolve one or two issues.

When i look at the flight logs I’m constantly seeing:-
1) Rudder limit reached
2) Cyclic ring activated
3) Main loop hang occurred

I have been flying for around 5 years and have used BeastX/Brain/vBar and now Spirit, i changed to spirit because i love the full bail out feature, although i have limit knowledge i did manage to setup all the above with no real issues however i just cannot resolve the above issues with the spirit.

I have tried and tried to resolve these but with no real luck, the Spirit manual is very good on setup up of the unit and describing what these faults are, however there is no real guide which tells me how to resolve these issues.

My suggestion is , would it be possible for someone to write a guide on how issue like these may be resolved.

Regards Alan


Top
 Profile  
 
 Post subject: Re: Suggestion
PostPosted: Mon 06. Apr 2015 12:36:45 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12389
First from all, you have to check, when these events are occuring.

For example if you are getting these events when the helicopter is on the ground, then there is everything correct.

Rudder limit is reached when the servo horn is at the full configured deviation. It will happen if you move with your rudder stick on the ground or you will move with your helicopter by hand.

But if it is there during a flight, then there is a problem. Your rudder is not working perfectly in some cases - you have to increase RPM or tail efficiency (longer tail blades) or rudder limits. If this event is happening too frequently, your tail can even blow out, because there is no room for necessary correction.

Cyclic Ring activation is not so important and is quite normal during 3D manouvers. By increasing Aileron / Elevator limits it should be resolved.

Main loop hang should not happen normally, can be fixed by adding some filtration capacitor, ferrite ring. Also can be result of too high static discharges. Also possibly caused by very high Aileron/Elevator range.
With new FW version checking for this event should be more benevolent.

_________________
Spirit System developer


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: Bing [Bot], horneteer and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .