| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| GeoLink compass calibration https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=5361 |
Page 1 of 1 |
| Author: | cwdrew [ Fri 26. Aug 2022 20:24:40 ] |
| Post subject: | GeoLink compass calibration |
V1 or V2 (1.3.0 or 1.3.1) When I calibrate the compass it always takes 3 times Apply power , move helicopter around, invert , move more … remove power… repeat 2 more times before green led on V2 won’t light and the blue led comes on after gps lock Is this normal ? Thanks |
|
| Author: | ZeXx86 [ Fri 26. Aug 2022 21:09:20 ] |
| Post subject: | Re: GeoLink compass calibration |
This unfortunately mean that the compass calibration was never finished. After 3 tries it will return to original calibration. The Status LED must be flashing periodically when it is finished. |
|
| Author: | cwdrew [ Sun 28. Aug 2022 16:13:59 ] |
| Post subject: | Re: GeoLink compass calibration |
I found a YouTube video Paint a sphere Nose north What indication shows it has completed calibration For v2 and v1 Thanks |
|
| Author: | ZeXx86 [ Sun 28. Aug 2022 18:33:29 ] |
| Post subject: | Re: GeoLink compass calibration |
When Calibration is finished then the Status LED will be flashing periodically even when there is no movement. And it will flash until you will plug battery off. |
|
| Author: | cwdrew [ Tue 30. Aug 2022 15:46:04 ] |
| Post subject: | Re: GeoLink compass calibration (SOLVED) |
Thanks... Needed to be more patient. Changes from GREEN to blinking BLUE once done |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|