Spirit System
https://www.spirit-system.com/phpBB3/

Problems with Windows Application 3.4.1
https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=5358
Page 1 of 3

Author:  malelo1960 [ Thu 25. Aug 2022 10:36:13 ]
Post subject:  Problems with Windows Application 3.4.1

Hello together,
i have a nervy problem with the windows application Spirit 3.4.1:

If i go to settings of the geolink module another window open.

But the setting parameters in the down positions are not reachable for me, because the window is out of range.
My graphic settings on my notebook are 1366 x 768 which is very common 15" screens and its not possible to make them higher.
The window for the setting should be scrollable or able to maximize. I think that the programmer used another resolution and fixed the window. It is not possible to move the window more high to get access, only down works.

So, what can i do. I tried yesterday for hours with my windows 10 settings without any solution.

Thanks a lot for your help.

Greetings, Mario

Author:  ZeXx86 [ Thu 25. Aug 2022 10:52:37 ]
Post subject:  Re: Problems with Windows Application 3.4.1

Hello,

in some systems fonts are enlarged very much in the system settings. It should be enough to decrease system font size as temporaral solution.
Could you maybe take a screenshot so I can see how it looks on your notebook?
Our app is optimized even for smaller screens. So I guess there is some unusual font settings.

Author:  malelo1960 [ Thu 25. Aug 2022 11:05:06 ]
Post subject:  Re: Problems with Windows Application 3.4.1

Dear Sirs,
as an attachment you get a screenshot.

My windows scaling is on the lowest 100%. Less is not possible.

Attachment:
Spirit-Screenshot.jpg
Spirit-Screenshot.jpg [ 84.6 KiB | Viewed 589 times ]


Thanks for another solution....

Author:  urgno [ Fri 26. Aug 2022 8:54:03 ]
Post subject:  Re: Problems with Windows Application 3.4.1

have you tried to resize the window from top to smaller size ?
then you should be able to move it up

Author:  amal2029 [ Fri 02. Sep 2022 14:01:57 ]
Post subject:  Re: Problems with Windows Application 3.4.1

Hi Everyone,

I am facing similar problem as OP. I have 2 notebooks, one with Win 7 Pro and another with Win 10 Pro. On both NBs GeoLink page cant be fully utilized after updating to V3.4.2. The bottom area is below the active screen.

I try to follow Mr.Tomas temp solution but my font size is set to minimum and screen resolution is on it's max. No change can be done.

Has anyone managed to find a solution for this? Please share with us.

Thank you,

Amal

Attachments:
2022-09-02 19_47_47-Window.jpg
2022-09-02 19_47_47-Window.jpg [ 55.91 KiB | Viewed 533 times ]
2022-09-02 19_39_32-.jpg
2022-09-02 19_39_32-.jpg [ 103.3 KiB | Viewed 533 times ]

Author:  proctormw [ Sat 03. Sep 2022 15:28:35 ]
Post subject:  Re: Problems with Windows Application 3.4.1

Had the seem problem. Temporary fix is go to display and change from landscape to portrait. It’s a little tricky moving the mouse but you can get to the settings

Author:  amal2029 [ Sat 03. Dec 2022 4:42:25 ]
Post subject:  Re: Problems with Windows Application 3.4.1

Mr.Tomas,

I really need your help on this matter. I could not access the features of Geolink in my notebook as the Geolink selection window's bottom potion is not visible.

Attachment:
2022-12-03 10_16_53-.jpg
2022-12-03 10_16_53-.jpg [ 101.1 KiB | Viewed 449 times ]


Spirit SW: V3.4.3
Notebook OS: Win 7 Pro 64Bit
Screen resolution: 1440 X 900 (Maximum available)

Spirit main window appear normal as before.

Attachment:
2022-12-03 10_15_15-Screen Resolution.jpg
2022-12-03 10_15_15-Screen Resolution.jpg [ 55.65 KiB | Viewed 449 times ]


Attachment:
2022-12-03 10_16_19-.jpg
2022-12-03 10_16_19-.jpg [ 81.36 KiB | Viewed 449 times ]


This is my Notebook that I reserved for RC Heli use and which I use on the field. I really need you help to make it usable.

Thank you and regards,

Amal

Author:  ZeXx86 [ Sat 03. Dec 2022 9:08:32 ]
Post subject:  Re: Problems with Windows Application 3.4.1

Hello,

you can change window size by right clicking at the window title and selecting option to maximize for example.
This will make it to fit well.
The window size will be saved for next time with the latest version.

Author:  amal2029 [ Sat 03. Dec 2022 12:48:34 ]
Post subject:  Re: Problems with Windows Application 3.4.1

Mr.Tomos,

I am using the maximum available.

Attachment:
2022-12-03 18_44_04-Screen Resolution.jpg
2022-12-03 18_44_04-Screen Resolution.jpg [ 52.12 KiB | Viewed 431 times ]


Is there a way you can adjust some settings of Spirit program to fit into 1440 X 900 resolution?

Regards,

Amal

Author:  amal2029 [ Mon 05. Dec 2022 3:49:45 ]
Post subject:  Re: Problems with Windows Application 3.4.1

Mr.Tomas,

Is this the method you advised: right click on Spirit shortcut icon on the windows and go to properties, Shortcut, Run and change to minimize?

Attachment:
2022-12-04 21_31_31-Spirit Settings Properties.jpg
2022-12-04 21_31_31-Spirit Settings Properties.jpg [ 40.2 KiB | Viewed 405 times ]


I am sorry, it does not work that way.

Attachment:
2022-12-04 21_35_21-.jpg
2022-12-04 21_35_21-.jpg [ 64.17 KiB | Viewed 405 times ]


Regards,

Amal

Page 1 of 3 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/