Spirit System
https://www.spirit-system.com/phpBB3/

How to make rescue less aggressive?
https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=531		 Page 1 of 1
Author:  eenoph [ Sun 15. Mar 2015 16:50:14 ]
Post subject:  How to make rescue less aggressive?
Hi guys,
I have spirit on my goblin 700 (original v1) and my rescue set to normal with 70% collective. I got a boom strike (the blade took a good chunk of paint from the boom) yesterday when testing the rescue function from inverted hover position. Is there a way to make rescue flip less aggressive?
Author:  ZeXx86 [ Sun 15. Mar 2015 19:38:20 ]
Post subject:  Re: How to make rescue less aggressive?
Hi,

wow, that sounds bad.

You can make it less agressive by decreasing Aileron/Elevator range and decreasing Collective pitch for the rescue, in your case aileron/elevator is probably too big. What angle can you achieve on the full stick deflection?
Author:  eenoph [ Mon 16. Mar 2015 19:04:25 ]
Post subject:  Re: How to make rescue less aggressive?
Hi Tomas,
I have 12° on cyclic. I set it like I usually set on Vbar or beastx, set for max throw I can get without binding on full collective.

I will try to reduce it, but I'm a bit scare to test it... :(
Author:  ZeXx86 [ Mon 16. Mar 2015 19:20:51 ]
Post subject:  Re: How to make rescue less aggressive?
Well, you can decrease Collective pitch for the rescue first to for example 40%. If you have small camera, I recommend to record tail boom during the activation.
Then you will see if it is too close or you can increase.
Author:  FrankFuss [ Tue 17. Mar 2015 3:18:42 ]
Post subject:  Re: How to make rescue less aggressive?
Would this not be a problem if you were using Rescue (Acro) instead of using Rescue (Normal) from inverted? The forces to level and climb out would be much less.
Page 1 of 1 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/