I think the only reason is that you need the ch0 for a servo
other than that, is the perfect place to inject a backup power supply
( in addition to aux 1 / aux 2 )
| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| [SOLVED] Spirit GT Ch0 Port https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=5284 |
Page 1 of 1 |
| Author: | Michael [ Sun 10. Jul 2022 21:14:50 ] |
| Post subject: | [SOLVED] Spirit GT Ch0 Port |
Is there any reason I cannot use port CH0 on a Spirit GT for dual power supply ? Thank you |
|
| Author: | urgno [ Mon 11. Jul 2022 9:25:08 ] |
| Post subject: | Re: Spirit GT Ch0 Port |
I think the only reason is that you need the ch0 for a servo other than that, is the perfect place to inject a backup power supply ( in addition to aux 1 / aux 2 ) |
|
| Author: | Michael [ Mon 11. Jul 2022 9:33:40 ] |
| Post subject: | Re: Spirit GT Ch0 Port |
Many thanks for your reply. Just what I wanted to hear. I am trying to free up channels for GeoLink functions. |
|
| Author: | ZeXx86 [ Mon 11. Jul 2022 10:00:47 ] |
| Post subject: | Re: Spirit GT Ch0 Port |
Hello, CH0 port has nothing to do with GeoLink. You can use this port for anything. GeoLink functions are controlled by channels of your radio transmitter. |
|
| Author: | Michael [ Tue 12. Jul 2022 4:10:49 ] |
| Post subject: | Re: Spirit GT Ch0 Port |
I had the back up power supply cable plugged into Aux 2 on the Spirit Unit. I am using the dedicated GeoLink Channel option to trigger the GeoLink features I want to use - it seems more straightforward and frankly I didn't understand how triggering by engaging the Stabi function would work in practice. For this reason I wanted to maximise the number of free channels available. What I am unsure about is if I had the back up power supply plugged into the Aux 2 port on Spirit, would this mean I could not then use Aux 2 channel 7 in my transmitter to trigger a GeoLink function (or Stabilisation function for that matter). Hence the question about moving the back up power supply to Ch0. Many thanks |
|
| Author: | HeliMLM [ Tue 12. Jul 2022 6:52:37 ] |
| Post subject: | Re: Spirit GT Ch0 Port |
Hi no - the port Aux2 is just a connector on the Spirit unit. it has nothing to do with your radio (TX/RX) channel. you can use this channel for "F:" functions anyhow (wether something is connected on the unit or not). this is, btw, the same for all servo/bec connectors on the Spirit unit.... ch0-ch4, aux, thr have nothing to do with your radio channels. |
|
| Author: | Michael [ Tue 12. Jul 2022 9:50:00 ] |
| Post subject: | Re: Spirit GT Ch0 Port |
I am most grateful for your explanation. A lot clearer now and of great help to me. Many thanks Michael |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|