Spirit System
https://www.spirit-system.com/phpBB3/

[SOLVED] Problem with Spirit Pro:
https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=5135		 Page 1 of 1
Author:  GHIDI [ Sun 13. Mar 2022 16:21:47 ]
Post subject:  [SOLVED] Problem with Spirit Pro:
After flashing the Spirit Pro with version 3.3.3 everything works very well. I can program it completely without any problems and the servos receive all orders from the spirit. As soon as I disconnect the batteries and reconnect them the Spirit Pro does not work anymore and blinks constantly in red.
I repeated the experiment several times and each time I arrive at the same result: the Spirit Pro doesn't work anymore.
I found no explanation for this problem. :o :shock: :twisted:
Author:  ZeXx86 [ Sun 13. Mar 2022 20:55:45 ]
Post subject:  Re: Problem with Spirit Pro:
Hello,

please send me serial number of the unit to private message.
The problem happened right before the problem appeared for the first time in the memory of the unit and could be caused for example by unstable connection between software and unit.
However it is not a problem and the unit can be fixed easily by flashing special firmware which will recover lost memory. Then everything will work fine again.
Author:  GHIDI [ Mon 14. Mar 2022 18:19:18 ]
Post subject:  Re: Problem with Spirit Pro:
I sent the serial number as requested to solve this problem. Thanks
Author:  GHIDI [ Tue 15. Mar 2022 15:30:10 ]
Post subject:  Re: Problem with Spirit Pro:
My problem was solved with responsiveness and skill.
At Spirit System, support is highly reliable. You can trust them absolutely.
Thanks for everything. :D :D :)
Page 1 of 1 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/