|
It is currently Mon 25. Nov 2024 3:45:08
|
View unanswered posts | View active topics
 
|
Page 1 of 1
|
[ 2 posts ] |
|
| Author |
Message |
|
Lee Jordan
|
 Posted: Tue 04. Jan 2022 15:41:36 |
|
Joined: Fri 03. Sep 2021 9:50:29
Posts: 18
|
|
I set my spirit governor to 2000RPM.
In reality, the telemetry called 2300RPM.
So I took out my Tachometer and it read also 2300. Btw, this was on 67% throttle (flat curve)
Then,
I tried to reduce the governor setting to 1800rpm, just to see what happens.
The actual RPM eas even higher than before.
It was 2360rpm.
Motor is a scorpion 4525 10 pole.
I set the sensing devider to 5.
ESC range 1100-1940.
Gear ratio 10.1.
What the deal ?
Thanks in advance.
Sent from my Redmi Note 8 Pro using Tapatalk
|
|
| Top |
|
 |
|
ZeXx86
|
Posted: Tue 04. Jan 2022 15:46:10 |
|
 |
| Site Admin |
Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
|
|
Hello,
please make sure that Spirit Governor is enabled in all banks (if used).
And also that Governor in the ESC is really turned off and there is no spoolup procedure enabled that could interfere with Spirit Governor spoolup procedure.
This is dependent on mode that is configured in your ESC.
_________________
Spirit System developer
|
|
| Top |
|
|
|
|
Page 1 of 1
|
[ 2 posts ] |
|
 |
Who is online |
 |
Users browsing this forum: No registered users and 35 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
