| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| Auto Bailout Altitude Setting not working https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=4996 |
Page 1 of 1 |
| Author: | krm97 [ Thu 02. Dec 2021 2:12:08 ] |
| Post subject: | Auto Bailout Altitude Setting not working |
I recently updated my Jeti Transmitter with version 3.33 Integration. All of my heli's were working fine using a 6 meter level for auto bailout. When I checked to see what it was in the Spirit Program running on the Jeti, it was only 1 meter. It did not matter whether I used 1 meter of 6 meters, the auto bailout was activated at about 7-8 meters. What changes do I need to make to get the autobailout working properly again? All the best, Ken |
|
| Author: | HeliMLM [ Thu 02. Dec 2021 7:47:38 ] |
| Post subject: | Re: Auto Bailout Altitude Setting not working |
Hello Ken pls read the release notes of 3.3.3 carefully... there is a new process of activation of auto rescue. the height is set at the height you *activate* auto rescue... the parameter in the setting is not for auto rescue height, but for adjustment for inverted flight ("altitude rotor compensation" - normal/inverted will produce different air pressure for the sensor). so what you have changed only will affect auto rescue in inverted flight - pls check carefully if this is OK. if your Spirit integration still says "rescue height" => pls double check if your integration files have been overwritten in Jeti and all your Spirit units are on 3.3.3 |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|