| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| RPM Signal from CDI? https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=4825 |
Page 1 of 1 |
| Author: | lpaelke [ Thu 12. Aug 2021 22:09:35 ] |
| Post subject: | RPM Signal from CDI? |
I would like to use a Spirit RS with a Gasser with an RCEXL CDI Ignition. Can I get the RPM signal for the governor directly from the ignition? Either with a Y-cable from the Hall-sensor or from the tachometer outpout signal from the CDI? Or do I need an extra sensor? Thanks, Lutz |
|
| Author: | lpaelke [ Sun 12. Sep 2021 9:48:39 ] |
| Post subject: | Re: RPM Signal from CDI? |
OK, since there was no answer, I tried it myself. A Y-cable from the Hall-sensor of the ignition to the Spirit-RS worked in principle, but the signal was way to noisy. So now I use the Hall-sensor from the Jeti MRPM Hall EX (just the (replacement) sensor, not the whole MRPM EX module) with 2 magnets mounted on the cooling fan. This works fine. |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|