| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| GeoLink - Programing 4 points for fence https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=4812 |
Page 1 of 1 |
| Author: | FlyingBrick [ Tue 03. Aug 2021 14:54:54 ] |
| Post subject: | GeoLink - Programing 4 points for fence |
When trying to set points for geo fence at my flying site only first two will program. When setting third point the LED comes on in the FBL. I have tried this several times with no success. True north set with analog compass, 3.2.1 on fbl, 1.2.1 on GeoLink, 11 sat locked in. Using DX9 and Align 600. Three position switch on TX monitor shows it is working properly. This is my first Heli and my first time posting. I have been practicing hovering (at the field and on sim) and would like to move to forward flight with the fence and altitude limits from GeoLink. I'm at a loss on what to try next. Any suggestions are appreciated. |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|