| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| Wiring Spirit Pro https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=4771 |
Page 1 of 1 |
| Author: | Crashpilot1977 [ Sat 17. Jul 2021 22:45:31 ] |
| Post subject: | Wiring Spirit Pro |
What do I have to do if I plug a supply cable into the receiver and a cable into the Spirit AUX? Will there be a mass loop? |
|
| Author: | Crashpilot1977 [ Sun 18. Jul 2021 0:59:00 ] |
| Post subject: | Re: Wiring Spirit Pro |
I have just measured the master and slave cable of the HW-100A V3 and there is a galvanic connection to the two cables with each other. So they use the same mass/potential in the BEC/ESC. They are connected in parallel. No idea how other manufacturers handle this with master and slave. I don't think there are any potential differences here, so it works. In my opinion, this is a doubling of the cable cross-section. |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|