| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| telemetry data from GeoLink not displayed on transmitter https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=4765 |
Page 1 of 1 |
| Author: | p-51d [ Mon 12. Jul 2021 14:42:19 ] |
| Post subject: | telemetry data from GeoLink not displayed on transmitter |
Good afternoon the telemetry "topics" like speed, altitude, distance, SAT count etc ( from GeoLink ) are visible under "sensors/Logging Setup" on my transmitter DC 24 Jeti. The cable from the GeoLink is connected to the Spirit RS on port "SAT 2" . In the display there is no data shown like speed, altitude, distance, SAT count etc. Instead just a "minus sign" is visible. The telemetry data from the YGE ESC work fine. ( current, voltage, rpm, temperature etc ) Is this a known problem, or did I miss to configure something ? Thanks Kind Regards p-51d |
|
| Author: | ZeXx86 [ Mon 12. Jul 2021 16:34:51 ] |
| Post subject: | Re: telemetry data from GeoLink not displayed on transmitter |
Hello, I am afraid but at the moment there are only two telemetry variables transmitted from GeoLink to JETI radio. It is S Altitude and S Speed. These should be visible similarly as other variables from Spirit unit. All Spirit variables are starting with "S". |
|
| Author: | p-51d [ Mon 12. Jul 2021 17:05:45 ] |
| Post subject: | Re: telemetry data from GeoLink not displayed on transmitter |
Hello ZeXx86 Thanks for your fast response and the infos about the current limitations from the telemetry. I made a mistake ind configuration : the " S Speed " is working now... looking forward to FW updates for more GeoLink data... Kind Regards p-51d |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|