Good afternoon

the telemetry "topics" like speed, altitude, distance, SAT count etc ( from GeoLink )
are visible under "sensors/Logging Setup" on my transmitter DC 24 Jeti.
The cable from the GeoLink is connected to the Spirit RS on port "SAT 2" .

In the display there is no data shown like speed, altitude, distance, SAT count etc.
Instead just a "minus sign" is visible.

The telemetry data from the YGE ESC work fine. ( current, voltage, rpm, temperature etc )

Is this a known problem, or did I miss to configure something ?

Thanks
Kind Regards

p-51d

Hello,

I am afraid but at the moment there are only two telemetry variables transmitted from GeoLink to JETI radio.
It is S Altitude and S Speed.
These should be visible similarly as other variables from Spirit unit. All Spirit variables are starting with "S".

_________________
Spirit System developer

Hello ZeXx86

Thanks for your fast response and the infos about the current limitations from the telemetry.
I made a mistake ind configuration : the " S Speed " is working now...

looking forward to FW updates for more GeoLink data...

Kind Regards

p-51d