| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| Delay setting for xlpower rudder servo https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=4642 |
Page 1 of 1 |
| Author: | Jay23 [ Sat 17. Apr 2021 9:14:49 ] |
| Post subject: | Delay setting for xlpower rudder servo |
As above what delay setting should the xlpower DS747RS 760μs Rudder Servo be set too as it's not listed in the servo list on the spirit website. Thanks |
|
| Author: | Gtamas [ Mon 19. Apr 2021 15:19:13 ] |
| Post subject: | Re: Delay setting for xlpower rudder servo |
Hi! I'm using the same servo in XL520, with 0 delay. It is working very well. |
|
| Author: | Kluftinger [ Sat 24. Apr 2021 16:32:30 ] |
| Post subject: | Re: Delay setting for xlpower rudder servo |
So far I have for all high quality tail servos the "rudder delay" at 0 - 2. Only for Align tail servos I had to use higher values: Align DS455HV = 8, Align DS 535 HV = 4 |
|
| Author: | gjhernandez [ Wed 05. May 2021 13:41:01 ] |
| Post subject: | Re: Delay setting for xlpower rudder servo |
I use 4 and works perfect. But according to the manual it seems it should be 0 |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|