I got the screen with a alarm : Alarm : S vibes < 30% (0)
I have no clou what it means ?
Using a Spirit RS and DS12
Regards , Arno
| Attachments: |
|
A122725F-9EE2-4046-AAEA-A34A8976C46C.jpeg [ 1.13 MiB | Viewed 760 times ] |
| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| Alarm S vibes https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=4640 |
Page 1 of 1 |
| Author: | Helikapoter [ Tue 13. Apr 2021 23:43:31 ] | ||
| Post subject: | Alarm S vibes | ||
I got the screen with a alarm : Alarm : S vibes < 30% (0) I have no clou what it means ? Using a Spirit RS and DS12 Regards , Arno
|
|||
| Author: | vvv850 [ Wed 14. Apr 2021 7:13:37 ] |
| Post subject: | Re: Alarm S vibes |
This is an external telemetry sensor, from your FBL. The alarm means that the level of vibrations measured by Spirit went over 30%. I don't know if this is a default alarm created automatically when using the Jeti wizard for Spirit, or you created the alarm in the past. |
|
| Author: | buttles [ Wed 14. Apr 2021 8:25:36 ] |
| Post subject: | Re: Alarm S vibes |
It may be a typo in the firmware but that alarm is saying vibes LESS than 30%. Look in the alarms section on the Tx and check what has been set. I would expect to see >30%. I set a number 10% more than my recorded vibes. |
|
| Author: | ZeXx86 [ Mon 19. Apr 2021 13:54:07 ] |
| Post subject: | Re: Alarm S vibes |
Hello, you can delete this alarm. It does not make a sense, because it will trigger whenever vibrations are under 30%. Likely you created it by mistake. |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|