| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| Spektrum Receiver AR8000 PWM connection https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=463 |
Page 1 of 2 |
| Author: | Hififreak [ Sun 08. Feb 2015 23:49:55 ] |
| Post subject: | Spektrum Receiver AR8000 PWM connection |
Hallo, i build my first Heli (KDS Chase 360), at first i take the AR610 but i change to the Spektrum AR8000 Receiver and i need the PWM connection from Hobbywing Platinum 50 to Ar8000 and from AR8000 to the Spirit. i have the Spektrum DX6 Black edition Sorry i am a beginner Thanks Regards Ritchy |
|
| Author: | ZeXx86 [ Mon 09. Feb 2015 8:33:07 ] |
| Post subject: | Re: Spektrum Receiver AR8000 PWM connection |
Hello, you can use this howto: viewtopic.php?f=20&t=427 |
|
| Author: | Hififreak [ Mon 23. Feb 2015 13:01:18 ] |
| Post subject: | Re: Spektrum Receiver AR8000 PWM connection |
i can make what i want, but it does´t works. I take the ar610 and ar8000 |
|
| Author: | ZeXx86 [ Mon 23. Feb 2015 13:02:55 ] |
| Post subject: | Re: Spektrum Receiver AR8000 PWM connection |
Hello, can you describe what does not work? Make sure that PWM receiver type is configured in the software. |
|
| Author: | Hififreak [ Mon 23. Feb 2015 14:36:17 ] |
| Post subject: | Re: Spektrum Receiver AR8000 PWM connection |
The connect from the receiver to the spirit doesn't work I test the receiver, i take the servos into the receiver and there are works. But not with the Spirit. Your manual in english is to deferent to the in german. I think the mistake is when i bind the system, but i can't find the correct way |
|
| Author: | ZeXx86 [ Mon 23. Feb 2015 14:52:34 ] |
| Post subject: | Re: Spektrum Receiver AR8000 PWM connection |
OK, please can you take a photo of your connection? This can be much faster to determine where is the problem. |
|
| Author: | Hififreak [ Mon 23. Feb 2015 15:18:48 ] |
| Post subject: | Re: Spektrum Receiver AR8000 PWM connection |
when i change to PWm the rud works, but the other ones not but this is not Spektrum DXms2 with satellites did i need the spektrum adapter for the ar 8000 but i test with the ar610 there are the thame problem |
|
| Author: | ZeXx86 [ Mon 23. Feb 2015 15:22:29 ] |
| Post subject: | Re: Spektrum Receiver AR8000 PWM connection |
You should set connection type to PWM if it is normal receiver connected with three cables that are included in the box of the unit. |
|
| Author: | Hififreak [ Mon 23. Feb 2015 18:02:29 ] |
| Post subject: | Re: Spektrum Receiver AR8000 PWM connection |
i have a SPEKTRUM DSM2/X SATELLIT recever, the protocol are DSMX |
|
| Author: | ZeXx86 [ Mon 23. Feb 2015 18:07:02 ] |
| Post subject: | Re: Spektrum Receiver AR8000 PWM connection |
It does not matter which satellite you are using, if you want to use AR8000 (+ satellite) it must be always PWM connection type. |
|
| Page 1 of 2 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|