Spirit System • View topic - Spirit 2 with Futaba FASStest

It is currently Sun 24. Nov 2024 0:56:43

View unanswered posts | View active topics

Board index » English » HELI » Support

All times are UTC + 1 hour

Spirit 2 with Futaba FASStest

Page 1 of 1

[ 9 posts ]

Print view

Previous topic | Next topic

Author

Message

jszewczyk

Post subject: Spirit 2 with Futaba FASStest

Posted: Wed 30. Dec 2020 2:15:33

Joined: Wed 30. Dec 2020 2:07:46
Posts: 5

Hi,

I want to connect telementry for Futaba 14SG (Futaba R7008SB) and Hobbywing Platinum 60A V4 ESC

It would work with Spirit 2 with Frsky Cable?
http://manual.spirit-system.com/index.p ... _Telemetry

Telemetry from Platinum 60A V4 ESC I make like this, with Telem UNI cable?
http://manual.spirit-system.com/index.p ... _Telemetry

Thanks for help. I'm not sure, because I found only information about Spirit 1

Best,

Jacek

Top

ZeXx86

Post subject: Re: Spirit 2 with Futaba FASStest

Posted: Wed 30. Dec 2020 8:22:38

Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442

Hi,

yes, you are right. You will need both cables to make it work together.

_________________
Spirit System developer

Top

jszewczyk

Post subject: Re: Spirit 2 with Futaba FASStest

Posted: Thu 01. Apr 2021 17:58:03

Joined: Wed 30. Dec 2020 2:07:46
Posts: 5

Hi,

I have connected everything. Futaba see correcly a telementry and a RPM information. I have problem with FBL unit, becouse I checked via android app and rpm value is 0 (maybe for a moment I see 400-700 and it change to 0). For clear I tell you, the classic RPM sensor cable from ESC is disconnected from Spirit 2 unit.

Previously when I have connected RPM sensor cable from ESC directly to FBL unit, I have seen values.

Could you help me?

Attachments:

2021-04-01 18.48.48.jpg [ 4.43 MiB | Viewed 530 times ]

Top

ZeXx86

Post subject: Re: Spirit 2 with Futaba FASStest

Posted: Thu 01. Apr 2021 20:48:50

Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442

Hi,

what about other telemetry values?
For example Battery Voltage?

Is your ESC updated to the latest firmware (but not for VBar)?

_________________
Spirit System developer

Top

jszewczyk

Post subject: Re: Spirit 2 with Futaba FASStest

Posted: Thu 01. Apr 2021 21:39:32

Joined: Wed 30. Dec 2020 2:07:46
Posts: 5

All telementry read from spirit 2 in Futaba works fine, RPM too. Problem is only with value in governor RPM metter in governor setting, because of zero.

ESC is uptodate. Please take a look in attachments.

Attachments:

Zrzut ekranu 2021-04-01 22.24.23.png [ 45.26 KiB | Viewed 517 times ]

2021-04-01 22.28.13-1.jpg [ 2.81 MiB | Viewed 517 times ]

2021-04-01 22.29.28.jpg [ 5 MiB | Viewed 517 times ]

Top

ZeXx86

Post subject: Re: Spirit 2 with Futaba FASStest

Posted: Thu 01. Apr 2021 21:48:19

Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442

This is all correct. You can't use RPM value from telemetry for governor. Spirit app is showing data from sensor, but there is no RPM sensor connected.

_________________
Spirit System developer

Top

jszewczyk

Post subject: Re: Spirit 2 with Futaba FASStest

Posted: Thu 01. Apr 2021 21:50:40

Joined: Wed 30. Dec 2020 2:07:46
Posts: 5

Aaaa. How can I connect rpm sensor, becouse of this port is used for frsky interface for futaba

Attachments:

2021-04-01 22.51.52.jpg [ 4.75 MiB | Viewed 516 times ]

Top

ZeXx86

Post subject: Re: Spirit 2 with Futaba FASStest

Posted: Thu 01. Apr 2021 21:53:55

Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442

You can add wire from the ESC in the middle position. This is unused. You can use connector from the FrSky integration cable. Or change servo connector to a single pin plastic. Then you can connect and disconnect both separately.

_________________
Spirit System developer

Top

jszewczyk

Post subject: Re: Spirit 2 with Futaba FASStest

Posted: Thu 01. Apr 2021 21:59:18

Joined: Wed 30. Dec 2020 2:07:46
Posts: 5

I added in the middle position. Thanks! Works great, my Master

Top

Page 1 of 1

[ 9 posts ]

Board index » English » HELI » Support

All times are UTC + 1 hour

Who is online

Users browsing this forum: No registered users and 66 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: