| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| Reset gyro! https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=4530 |
Page 1 of 1 |
| Author: | Tord J [ Sun 07. Feb 2021 19:10:15 ] |
| Post subject: | Reset gyro! |
I'm going to reset the gyro to factory settings. The gyro is seated so that it is difficult to take in and out the cables. Is it possible to reprogram the gyro with the servos connected without the servos breaking? |
|
| Author: | ZeXx86 [ Sun 07. Feb 2021 20:02:17 ] |
| Post subject: | Re: Reset gyro! |
If your servos are all 1520 then nothing wrong should happen. In the worst case it is enough to unplug Rudder. Or at least tail servo arm. |
|
| Author: | Tord J [ Sun 07. Feb 2021 20:33:45 ] |
| Post subject: | Re: Reset gyro! |
Ok I should be able to disconnect the tail rudder. Thanks.. |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|