Hi ZeXx86
That worked. Excellent.
Thanks for the prompt response. Much appreciated.
Cheers
| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| [SOLVED] Spirit 2 and Jeti DS16 https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=4471 |
Page 1 of 1 |
| Author: | nzlsubzero [ Mon 04. Jan 2021 8:45:59 ] |
| Post subject: | [SOLVED] Spirit 2 and Jeti DS16 |
Hi I am trying to get AUX1 working for the throttle. I have assigned the 'Throttle' in the setup to Channel 1. This should have the throttle output now on AUX1 output from the unit. The ESC however will not initialise. If i however use an RX output to the ESC, I can get the ESC to work. I would prefer to use AUX1. Any suggestions will be very helpful. Thanks |
|
| Author: | ZeXx86 [ Mon 04. Jan 2021 8:48:44 ] |
| Post subject: | Re: Spirit 2 and Jeti DS16 |
Hi, it is enough to recalibrate the ESC, because it has throttle range from the receiver. Or you can change settings in the Spirit unit in the General - Throttle - Throttle Range so it will match the old range from receiver. Range from receiver is 1000 - 2000us. So after changing everything should work. |
|
| Author: | nzlsubzero [ Mon 04. Jan 2021 8:57:25 ] |
| Post subject: | Re: Spirit 2 and Jeti DS16 |
Hi ZeXx86 That worked. Excellent. Thanks for the prompt response. Much appreciated. Cheers |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|