Spirit System
https://www.spirit-system.com/phpBB3/

Gyro setting on Futaba T14SG
https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=4443		 Page 1 of 1
Author:  NZ2000 [ Fri 18. Dec 2020 20:58:38 ]
Post subject:  Gyro setting on Futaba T14SG
Hello,

Im currently trying to set up a good tail on my 700 Diabolo.
Im using the Spirit Pro with a Futaba T14SG.

I want to follow the Spirit Tuning Guide and i have a question about the 3rd step: Set Gyro Gain.

As far as i know this means to change the value on channel 5?
It's possible to set a value from -100 to 100 ,so where should i start?
And also i have the possibility to change a value in the Gyro settings of the T14SG. But this does not change a value in the channel overview. So for what is this value exactly?

Thanks in advance. :)

NZ2000
Author:  ZeXx86 [ Fri 18. Dec 2020 21:02:29 ]
Post subject:  Re: Gyro setting on Futaba T14SG
Changing GYRO gain in the GYRO menu should work normally.

It is recommended to start with 50% gain. You can see how gain is changing the the Diagnostic tab.
Author:  NZ2000 [ Fri 18. Dec 2020 21:44:32 ]
Post subject:  Re: Gyro setting on Futaba T14SG
Thanks for the fast reply.

Now just for my understanding, what is the difference between the Gyro setting in my Transmitter(0-100) and the Head-Lock(-100-100) wich i control over a potentiometer on the transmitter?

I dont know which value i should change when?
Page 1 of 1 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/