Spirit System
https://www.spirit-system.com/phpBB3/

Problem setup swashplate h4 / spirit pro
https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=4422		 Page 1 of 1
Author:  siberian [ Fri 04. Dec 2020 0:29:28 ]
Post subject:  Problem setup swashplate h4 / spirit pro
Hello,

just tried to setup the spirit pro with the assistant. servos connected according to instruction (h4 90 degrees)
problems:
only ch 3 react to pitch (minimal servo travel)
only ch 1 react to aileron

see video

[youtube] https://youtu.be/U8H1VP8ulDg[/youtube]



Image
Image
Image

how to solve the problems?

cheers
Author:  ZeXx86 [ Sat 05. Dec 2020 9:05:12 ]
Post subject:  Re: Problem setup swashplate h4 / spirit pro
Hello,

please set Swashplate type to CCPM 90 Velos, not CCPM 90.
Author:  siberian [ Mon 07. Dec 2020 14:03:12 ]
Post subject:  Re: Problem setup swashplate h4 / spirit pro
Hello,

problem is not solved with the velos setting.

Pitch: only CH 0 and CH 3 working
Aileron: only CH 1 working
Elevator: CH 0 and CH 2 working

Any new solution?

Cheers
Author:  ZeXx86 [ Tue 08. Dec 2020 21:45:53 ]
Post subject:  Re: Problem setup swashplate h4 / spirit pro
Hello,

I am afraid, but something is still wrong in the setup.

It is very important to set CCPM 90 Velos and save the settings.

Then all servos must move when you are moving with Pitch channel.

Can you verify that Pitch channel is moving in the Diagnostic tab, please?
Page 1 of 1 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/