| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| Which swashplatetype https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=4396 |
Page 1 of 1 |
| Author: | Diamondblack [ Sun 15. Nov 2020 22:24:20 ] | ||
| Post subject: | Which swashplatetype | ||
I have an jetcat pht3 turbine with 4 servos on swashplate. The problem is that the spirit pro can only H4 90deg i need H4 90deg +45deg. No it is a hc3sx mounted on the turbine but i would like to fly with the spirit. So what can i do? Is it possible to get an update in the future where this will work? Thanks
|
|||
| Author: | tomsl [ Sun 15. Nov 2020 22:52:47 ] |
| Post subject: | Re: Which swashplatetype |
Hello what you are looking for is on the EXPERT SETTINGS page. Cyclic phase: The value indicates the angle by which the swashplate is virtually rotated. For example a value of 90 will rotate the elevator to aileron. This feature is recommended for models with multi-blade rotor heads. For most other models, we recommend a zero value. |
|
| Author: | Diamondblack [ Sun 15. Nov 2020 22:58:34 ] |
| Post subject: | Re: Which swashplatetype |
Have try this to change to minus and plus 45 but it will not work |
|
| Author: | ZeXx86 [ Mon 16. Nov 2020 8:30:16 ] |
| Post subject: | Re: Which swashplatetype |
Hello, for sure it can work with Phase angle rotation. We have many scale pilots with similar helicopters. If not +45° then -45° can work. Then only correct servo reversing is needed. |
|
| Author: | Diamondblack [ Mon 16. Nov 2020 15:45:23 ] |
| Post subject: | Re: Which swashplatetype |
okay will try again. Can you say me how i have to plug in the servos then? Servo ch number on spirit front left ? front right ? rear left ? rear right ? that will be great! |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|