I have an original (flybar) Raptor 50 and have bought a Spirit RS for it, to use with Geolink. I will set the RS to 'flybar' operation in the settings.

My issue is which 'swashplate type' to use in setup. The heli has separate (dedicated) servos for aileron, elevator, pitch and rudder, so unlike a CCPM arrangement, the pitch servo acts on its own to operate the swashplate up/down. The swashplate setup options given don't seem to cover my needs. I fully appreciate this is a very old heli design but have I made a mistake buying a Spirit RS and Geolink for this model?

Many thanks, Andy

CCPM 90

There should be no problem with this model.

_________________
Spirit System developer

Bingo! I'd been through every option but obviously hadn't 'saved' the correct one in the setup wizard sequence. Now all good - many thanks for the quick reply.

Andy