| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| Problem with swashplate leveling https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=431 |
Page 1 of 1 |
| Author: | Bjoern_ve [ Thu 15. Jan 2015 20:45:46 ] |
| Post subject: | Problem with swashplate leveling |
I need a little help from you. I made a video of my problem. https://www.youtube.com/watch?v=kpMt-BQYLmE Description of the problem: When I make inputs on aileron and elevator do while the engine is off, the swashplate moves back into neutral. If the engine is running then it keeps its status and does not return to neutral. Is this normal? I could find no vibrations. Someone an idea, or is that correct? Greeting Bjoern |
|
| Author: | ZeXx86 [ Thu 15. Jan 2015 21:15:18 ] |
| Post subject: | Re: Problem with swashplate leveling |
Hello, this is very normal behavior of our FBL system. It is working exactly as it should. Behavior in "the flight" and on the ground is different. |
|
| Author: | Bjoern_ve [ Thu 15. Jan 2015 21:24:26 ] |
| Post subject: | Re: Problem with swashplate leveling |
Hi, but how does the FBL detect the motor is running, because that makes a difference. Björn |
|
| Author: | ZeXx86 [ Thu 15. Jan 2015 21:30:27 ] |
| Post subject: | Re: Problem with swashplate leveling |
It is determined by vibrations which are always present on any model with rotating parts. Don't be afraid, it will work fine. |
|
| Author: | Bjoern_ve [ Sat 17. Jan 2015 7:08:45 ] |
| Post subject: | Re: Problem with swashplate leveling |
Thanks for the quick help. |
|
| Author: | Bjoern_ve [ Thu 23. Apr 2015 19:57:55 ] |
| Post subject: | Re: Problem with swashplate leveling |
Hello, This video is a difference in behavior. The swash plate returns to its original position during the motor is running. Is there something wrong with the FBL? Björn |
|
| Author: | ZeXx86 [ Thu 23. Apr 2015 20:54:05 ] |
| Post subject: | Re: Problem with swashplate leveling |
This is normal if vibrations without blades are very low so it is recognized as if your model is not in the air. With blades there should be higher vibrations so then the swashplate will behave little bit differently. |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|