Spirit System https://www.spirit-system.com/phpBB3/ |
|
Jeti DS/DC Firmware Update 5.04 https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=4301 |
Page 1 of 2 |
Author: | HeliMLM [ Mon 21. Sep 2020 15:16:52 ] |
Post subject: | Jeti DS/DC Firmware Update 5.04 |
Hello Tomas should the firmware update for the Jeti DS-12 be loaded into DS-12 Spirit Edition too or will there be a separate update? thx Michael |
Author: | ZeXx86 [ Mon 21. Sep 2020 15:48:59 ] |
Post subject: | Re: Jeti DS/DC Firmware Update 5.04 |
Hello, yes, you can load it with Jeti Studio normally. Now enhanced features for Spirti units are available for all JETI radios. |
Author: | Fortune7 [ Mon 21. Sep 2020 17:29:42 ] |
Post subject: | Re: Jeti DS/DC Firmware Update 5.04 |
"Now enhanced features for Spirti units are available for all JETI radios". Hi Tomas, I just installed Jeti Update 5.04 to my DS-12 Tx and I don't see the Spirit advanced features in the Heli Tuning menu. From Jeti's release notes: New wizard for helicopters equipped with the Spirit FBL stabilization unit. In the Main Menu – Heli Tuning it is possible to enter directly the configuration menu of the FBL unit. Do I have to install any other updates to get this, please? Cheers, Andy |
Author: | buttles [ Mon 21. Sep 2020 17:54:53 ] |
Post subject: | Re: Jeti DS/DC Firmware Update 5.04 |
ZeXx86 wrote: Hello, yes, you can load it with Jeti Studio normally. Now enhanced features for Spirti units are available for all JETI radios. Errm, not quite!! Only for DS-12 and DC-16ii. My 'new' DS-24 is obviously too old for the update. Snotagram going off to Jeti if I cared more |
Author: | HeliMLM [ Mon 21. Sep 2020 20:02:42 ] |
Post subject: | Re: Jeti DS/DC Firmware Update 5.04 |
i've successfully done the update on our 2nd DS-12 (the non-Spirit-Edition) too... after the update it's now with same integration level as the other one => if you create a new model => Heli => Pic & Color => next page: you can select Heli "Standard" or "Spirit"... "Spirit" will do some basic settings for you and a model created with "Spirit" selection has "Spirit" as 1st menu option in Heli Assistant menu now. (should be available as option in Basic settings too... so you can activate for existing helis) |
Author: | latjo-k [ Mon 21. Sep 2020 20:14:12 ] |
Post subject: | Re: Jeti DS/DC Firmware Update 5.04 |
Hi Jeti studio says 5.03 is the latest firmware for DS-14. //Latjo |
Author: | Fortune7 [ Mon 21. Sep 2020 22:54:05 ] |
Post subject: | Re: Jeti DS/DC Firmware Update 5.04 |
HeliMLM wrote: i've successfully done the update on our 2nd DS-12 (the non-Spirit-Edition) too... after the update it's now with same integration level as the other one => if you create a new model => Heli => Pic & Color => next page: you can select Heli "Standard" or "Spirit"... "Spirit" will do some basic settings for you and a model created with "Spirit" selection has "Spirit" as 1st menu option in Heli Assistant menu now. (should be available as option in Basic settings too... so you can activate for existing helis) Thanks, Michael, that answered my question! I was wondering how to unlock the extra Spirit functionality for existing models. Do you know if making the change to 'Spirit' in basic settings / heli makes any other changes to settings or will all original settings be retained? I don't want any surprises when I fly next time! Cheers, Andy |
Author: | buttles [ Mon 21. Sep 2020 23:31:36 ] |
Post subject: | Re: Jeti DS/DC Firmware Update 5.04 |
latjo-k wrote: Hi Jeti studio says 5.03 is the latest firmware for DS-14. //Latjo I refer you to my previous comment!! |
Author: | HeliMLM [ Tue 22. Sep 2020 6:52:00 ] |
Post subject: | Re: Jeti DS/DC Firmware Update 5.04 |
Fortune7 wrote: ...Do you know if making the change to 'Spirit' in basic settings / heli makes any other changes to settings or will all original settings be retained? I don't want any surprises when I fly next time! Cheers, Andy Hi Andy, unfortunately no... all my models (even the ones with NEO) have been created with Spirit option from the very first beginning to have all channel mappings etc identical for all helis. so it is visible in all my models and i cannot test. but if you create a copy of an existing model, bind the Rx to it and test it.... this should give you the answer. or Tomas can answer for sure if settings are changed only during setup wizzard or with later change to "Spirit" too..... ? |
Author: | ZeXx86 [ Tue 22. Sep 2020 7:03:45 ] |
Post subject: | Re: Jeti DS/DC Firmware Update 5.04 |
Hello, only channel mapping is changed (if it is not a standard). So it should be perfectly save to switch the option. The update should be available for all JETI radios, likely there is only a delay for DS-14/24. |
Page 1 of 2 | All times are UTC + 1 hour |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |