| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| Geolink and Jive 80+ Hv telemetry work at the same time ? https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=4262 |
Page 1 of 1 |
| Author: | heli_5200 [ Sat 05. Sep 2020 18:08:37 ] |
| Post subject: | Geolink and Jive 80+ Hv telemetry work at the same time ? |
Hello does Geolink and Jive 80+ Hv telemetry work at the same time on the Spirit RS? greetings heli |
|
| Author: | ZeXx86 [ Sat 05. Sep 2020 19:09:42 ] |
| Post subject: | Re: Geolink and Jive 80+ Hv telemetry work at the same time |
Hello, yes. |
|
| Author: | heli_5200 [ Mon 14. Sep 2020 12:36:51 ] |
| Post subject: | Re: Geolink and Jive 80+ Hv telemetry work at the same time |
Hello I connected a Jive 80+ HV to the Spirit RS. Unfortunately the speed displayed is too high, 1516U / min ds Spirit, the Unisens 1347u / min The motor SK3 T 700 400u / v has 10 motors poles (10 magnets in the bell) but 12 poles on the stator. What do I have to enter, 5 or 6? greetings heli |
|
| Author: | tomsl [ Mon 14. Sep 2020 13:13:48 ] |
| Post subject: | Re: Geolink and Jive 80+ Hv telemetry work at the same time |
Hello 10 Magnets = 5 |
|
| Author: | heli_5200 [ Tue 15. Sep 2020 16:39:48 ] | ||
| Post subject: | Re: Geolink and Jive 80+ Hv telemetry work at the same time | ||
Hello, tried that out today. The helicopter turned at 1350 rpm (measured with an external tachometer). The Unisens showed 1342 rpm, the Spirit RS showed 1514 rpm. In the spirit is registered: Sensor divider 5 Gear ratio 9.3 (normal T-Rex 700 main gear 112T, pinion 12T) Why is that so imprecise? The unisens decreases the speed on the rotor shaft. Jeti DS-12 , Spirit RS Greetings heli
|
|||
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|
