| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| jeti rx's and udi https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=423 |
Page 1 of 1 |
| Author: | scott s [ Mon 12. Jan 2015 0:09:39 ] |
| Post subject: | jeti rx's and udi |
Man there is a total lack of info on using jeti rx's in udi format. Does anyone know the correct settings. Is it auto and computed? 5 to 20ms computed etc. I know that in ppm on newesr firmware that fail safes in the rx do not work in direct mode. At least on my r4 rx's it did not. I do not even recall seeing fail safe settings when in direct. Who is using what LOL! |
|
| Author: | taosgraveyard [ Mon 12. Jan 2015 13:35:10 ] |
| Post subject: | jeti rx's and udi |
I am using computed, 10 ms On jeti, fail saves work in direct mode for the first 4 channels. More than that, no. That's why I am using computed. Be sure to use latest Jeti rx firmware and latest tx software Even though UDI is a digital protocol with checksumming and error handling, I keep the rx to spirit line as short as is practical. |
|
| Author: | ZeXx86 [ Mon 12. Jan 2015 14:07:16 ] |
| Post subject: | Re: jeti rx's and udi |
Hi, it should work in nearly any settings. Failsafe is always handled by transmitter (except Spektrum satellites). |
|
| Author: | pkotatko [ Sat 17. Jan 2015 11:49:16 ] |
| Post subject: | Re: jeti rx's and udi |
I am using direct, 10ms and 100Hz frequency. I did first ten flights today with Jeti and R9. Latest FW in both. I don't using FS, because ESCs ( Jive and Kosmik ) are switching off in case of lost signal. That's all I want. Petr |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|