| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| [SOLVED] No telemetry on channel E1 possible with Spirit RS https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=4224 |
Page 1 of 2 |
| Author: | heli_5200 [ Mon 17. Aug 2020 11:40:58 ] |
| Post subject: | [SOLVED] No telemetry on channel E1 possible with Spirit RS |
Hello Unisens does not work for me on the Spirit RS at port E1. The port in the RS is on EX bus. With my Jeti Rex6 I have to set it to Jetibox / Sensor so that the sensor was recognized. That doesn't work with the RS, it just has EX bus EX bus input / backup or PPM Now I have to take the Ext and unfortunately the connector of the sensor has to be split. It's not that nice. Jeti DS-12 software 5.03 Spirit RS Firmware 3.1.0 greeting Heli |
|
| Author: | ZeXx86 [ Tue 18. Aug 2020 8:21:57 ] |
| Post subject: | Re: No telemetry on channel E1 possible with Spirit RS |
Hello, E1 can be configured to JETIBOX/Sensor in the Device Explorer/REX-RS. Please set this option, then it should work in the same way as with EXT port. EXT port is configured for JETIBOX/Sensor permanently. E1 is configured to JETIBOX/Sensor by default actually. |
|
| Author: | Franky13 [ Tue 18. Aug 2020 13:35:44 ] |
| Post subject: | Re: No telemetry on channel E1 possible with Spirit RS |
Hello, I do not get any telemetry data either. YGE sapphire, REX-RS and DS16. I have connected port 1 to the YGE controller Everything was copied into the device directory as described. It's just strange that it always worked with the same components in the Spirit 2 and SpiritPro ... Greeting |
|
| Author: | ZeXx86 [ Tue 18. Aug 2020 13:48:14 ] |
| Post subject: | Re: No telemetry on channel E1 possible with Spirit RS |
Port must be configured to JETIBOX/Sensor otherwise it will not work. Also you have to set JETI Telemetry in the ESC, not YGE telemetry. If you would use Spirit ESC telemetry, then it is YGE telemetry and also wiring is different. |
|
| Author: | Franky13 [ Tue 18. Aug 2020 14:04:29 ] |
| Post subject: | Re: No telemetry on channel E1 possible with Spirit RS |
I have set JetiExBus in the YGE controller! I have set E1 EXBus in the Spirit RS! In the DS16 transmitter I copied the Rex-RS folder in the device. nevertheless I do not get any telemetry data displayed in the DS16! |
|
| Author: | ZeXx86 [ Tue 18. Aug 2020 14:06:59 ] |
| Post subject: | Re: No telemetry on channel E1 possible with Spirit RS |
No, please set JETIBOX/Sensor to E1 port. |
|
| Author: | Franky13 [ Tue 18. Aug 2020 14:22:58 ] |
| Post subject: | Re: No telemetry on channel E1 possible with Spirit RS |
ok, changed to JetiBox/Sensor. No telemetry ... |
|
| Author: | ZeXx86 [ Tue 18. Aug 2020 14:33:43 ] |
| Post subject: | Re: No telemetry on channel E1 possible with Spirit RS |
We will make a guide. Certainly it will work. |
|
| Author: | heli_5200 [ Tue 18. Aug 2020 16:43:33 ] |
| Post subject: | Re: No telemetry on channel E1 possible with Spirit RS |
Hello, today E1 placed on JetiBox / Sensor. Telemetry with the Unisens is now working. thank you |
|
| Author: | ZeXx86 [ Tue 18. Aug 2020 16:59:13 ] |
| Post subject: | Re: No telemetry on channel E1 possible with Spirit RS |
You are welcome. |
|
| Page 1 of 2 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|