This may be of no use to anyone but the long jst to jst telemetry wire shipped with the ESC can be modified to work as a Spirit Telme.
The Spirit end stays as is (SAT 1) but the black wire on the ESC end needs moving to the 4th hole fron left. So it ends up being just right of the white wire. K-Config is set to Kontronik Telemetry, Front and the Spirit is set to Kontronik Telme.

And if you want all the telemetry the Kolibri has to offer you can do the same to the jst/JR cable. Spirit telemetry disabled, K-Config (1.3.7) set to Jeti and all the parameters. E1 set to ExBus.