It is currently Tue 12. Nov 2024 23:19:59

All times are UTC + 1 hour





Post new topic Reply to topic  [ 9 posts ] 
  Print view Previous topic | Next topic 
Author Message
PostPosted: Fri 29. May 2020 12:48:42 
Offline

Joined: Thu 25. Oct 2018 12:05:29
Posts: 46
Hello,

after installing 3.1 without any problem I tried to update geolink to 1.2.0, but some seconds after starting the process it reports "Flashing fehlgeschlagen" and retrying as suggested in help window doesn't work.
What could be the reason?

Regards, Toni


Top
 Profile  
 
PostPosted: Fri 29. May 2020 13:22:31 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12438
Usually this happen if GeoLink cable has some defect, so that connection is not 100%. Then during beginning of flashing the process will fail.

You can try to start flashing again in the Recovery mode.
Just start the Spirit unit and Spirit Settings again and select firmware and press Flash and Recovery mode buttons.
Then quickly reconnect power for GeoLink and flashing will begin.

Depending on your unit please do the geolink reconnect fast enough, with uSpirit this process could be more complicated. With Spirit Pro and Spirit 2 you do not have to do it quickly.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Fri 29. May 2020 13:56:33 
Offline

Joined: Thu 25. Oct 2018 12:05:29
Posts: 46
Hello Tomáš,

I will control my geolink cable, but up to now there wasn't a problem with it.
I tied recovery mode, but something was not correct - after pressing the button and in the moment of trying to plug in the button servos and motor (!!) moved for a short time.
Is it correct way for recovery mode to first unplug Geolink, then power up spirit, start software, go to geolink, select file, start upload and after error message new software start an then press recovery mode and connect geolink cable to spirit?
I use Spirit pro, so time after pressing the button is not critical when I understand you right.

Regards, Toni


Top
 Profile  
 
PostPosted: Fri 29. May 2020 14:03:26 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12438
Cable must be unplugged just after pressing flash button. Then immediately plug it again.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Fri 29. May 2020 15:47:07 
Offline

Joined: Thu 25. Oct 2018 12:05:29
Posts: 46
Ok, success, it works!

I tried several times and it didn't work.
Only after I deselected geolink and then selected it again it starts flashing immediately.

Thank you for helping,
Toni


Top
 Profile  
 
PostPosted: Sat 30. May 2020 14:24:47 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12438
Deselecting is not needed so probably it was just coincidence.
But it is great you have sorted it.

You are welcome.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Sun 31. May 2020 21:04:42 
Offline

Joined: Fri 25. Oct 2019 19:44:38
Posts: 1
Geo flasching and no connection to gyro.

Cable in Geo must be unplugged just after pressing flash button, then immediately plug it again.


Top
 Profile  
 
PostPosted: Thu 09. Jul 2020 9:25:02 
Offline

Joined: Tue 14. Apr 2020 12:44:56
Posts: 12
Hi

I also have a problem with gaoling. I upgrade software to 3.1.0 and firmware spirit-pro to 3.1.0.4. Then flash firmware of geolink to 1.2.0.4. First time it got stuck after uploading. Flashed again now it was successful. In the software I can see that both the spirit-pro and the gaoling are now at the latest fw. BUT geolink stopped working. After power up several times ... no flashing blue led on gaoling. It is not looking for satellites. The screen indicates no satelites found. Any ideas how to get the geolink working again?

thnx

Jo


Top
 Profile  
 
PostPosted: Thu 09. Jul 2020 9:38:44 
Offline

Joined: Tue 14. Apr 2020 12:44:56
Posts: 12
Jo Decuyper wrote:
Hi

I also have a problem with gaoling. I upgrade software to 3.1.0 and firmware spirit-pro to 3.1.0.4. Then flash firmware of geolink to 1.2.0.4. First time it got stuck after uploading. Flashed again now it was successful. In the software I can see that both the spirit-pro and the gaoling are now at the latest fw. BUT geolink stopped working. After power up several times ... no flashing blue led on gaoling. It is not looking for satellites. The screen indicates no satelites found. Any ideas how to get the geolink working again?

thnx

Jo



Sorry Guys, after waiting some more time my geolink came to life. Problem solved. Disgard my message.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 15 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .