| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| RTH + Altitude Hold in same channel does not work https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=4085 |
Page 1 of 1 |
| Author: | Pking [ Sun 21. Jun 2020 13:20:48 ] |
| Post subject: | RTH + Altitude Hold in same channel does not work |
Hi, I programmed RTH at 50% so it auto detects the right position when it’s turned on and on the same channel the Altitude Hold on a uSpirit The objective is to the RTH on and Altitude hold with the pitch movement allowed so I can adjust the altitude while the heli is coming back and remove my hand from the sticks. I tried and when I turn on everything, the pitch does not move at 50% for both channels it’s move at the beginning and then stops moving. When i did the configuration on the spirit Menu in Windows, the 50% was showing the auto program « on » and the altitude was « off ». If I flip to the setting I saw RTH «on » and Altitude hold at « on ». Is this setting supported ? can you support it in the future ? I only have a DX9. Envoyé de mon iPad en utilisant Tapatalk |
|
| Author: | Pking [ Tue 30. Jun 2020 1:04:30 ] |
| Post subject: | RTH + Altitude Hold in same channel does not work |
Hi, Thomas, can you tell me if this is supported on the same channel, see my previous post? I got a new spirit2 that is I in transit for a Goblin .buddy build and I would like to use the option on the same button, it’s they’re a difference between a uSpirit with a electric motor vs the Spirit2 ? Envoyé de mon iPad en utilisant Tapatalk |
|
| Author: | Pking [ Mon 06. Jul 2020 12:33:01 ] |
| Post subject: | Re: RTH + Altitude Hold in same channel does not work |
Bumping up. Envoyé de mon iPad en utilisant Tapatalk |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|