In the Spirit online manual, RB2C is described as the BEC voltage. But on my FrSky Horus after telemetry discovery, that particular RB2C stream defaults to units of mAh, not volts. I think this is an error/bug.

Here's the excerpt from the manual.



I’m thinking it should be voltage as described in the manual and that the Spirit unit is transmitting the wrong units info. (If it helps I can get a photo of my telemetry screen to show.)

I do know I can change the units easily enough myself, but I thought I'd point out the discrepancy.

Horus X10S ACCST, iXJT v2.1.0
OpenTX 2.3.5
YGE 35 LVT
uSpirit 3.1.0

_________________
Find me on HeliFreak, username Xoexoe

Bump. This also happens on my Spirit 2 with YGE 65LVT.

The telemetry stream RB2C defaults to mAh but it should be volts I believe.

Spirit 2
YGE 65LVT ESC
OpenTX 2.3.
FrSky Horus.
R-XSR receiver.

_________________
Find me on HeliFreak, username Xoexoe