Spirit System
https://www.spirit-system.com/phpBB3/

Is this a bug? RB2C defaults to mAh, not voltage.
https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=4068		 Page 1 of 1
Author:  xoexoe [ Tue 16. Jun 2020 11:15:05 ]
Post subject:  Is this a bug? RB2C defaults to mAh, not voltage.
In the Spirit online manual, RB2C is described as the BEC voltage. But on my FrSky Horus after telemetry discovery, that particular RB2C stream defaults to units of mAh, not volts. I think this is an error/bug.

Here's the excerpt from the manual.

Image

I’m thinking it should be voltage as described in the manual and that the Spirit unit is transmitting the wrong units info. (If it helps I can get a photo of my telemetry screen to show.)

I do know I can change the units easily enough myself, but I thought I'd point out the discrepancy.

Horus X10S ACCST, iXJT v2.1.0
OpenTX 2.3.5
YGE 35 LVT
uSpirit 3.1.0
Author:  xoexoe [ Fri 26. Jun 2020 18:55:36 ]
Post subject:  Is this a bug? RB2C defaults to mAh, not voltage.
Bump. This also happens on my Spirit 2 with YGE 65LVT.

The telemetry stream RB2C defaults to mAh but it should be volts I believe.

Spirit 2
YGE 65LVT ESC
OpenTX 2.3.
FrSky Horus.
R-XSR receiver.
Page 1 of 1 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/