Spirit System https://www.spirit-system.com/phpBB3/ |
|
Over rpms Oxy3 https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=4062 |
Page 1 of 1 |
Author: | Pino74 [ Mon 15. Jun 2020 19:13:32 ] |
Post subject: | Re: Over rpms Oxy3 |
I add one thing, that this problem start since I changed the radio,(from dx8 gen2 from Ix12) but I'm not sure, because at the same time I also updated the Spirit from 2.6 to 3.1. Now in my esc settings I have set option 2 (Helicopter Linear throttle) but on Helifreak someone says that option 1 must be used in the esc of the Hw, Fixed wing, when using the Governor of the Spirit. |
Author: | thestructured [ Tue 16. Jun 2020 18:28:45 ] |
Post subject: | Re: Over rpms Oxy3 |
Did you recalibrate your end points in the esc itself after switching radios? You shouldn’t have to in theory but it’s worth a shot. |
Author: | Pino74 [ Wed 17. Jun 2020 6:41:32 ] |
Post subject: | Re: Over rpms Oxy3 |
hello I recalibrated the end points, before enabling the governor on a linear curve on the radio but I have not solved the problem. Thanks for your help. I opened another post because I have better described the problem. |
Author: | ZeXx86 [ Wed 17. Jun 2020 13:42:34 ] |
Post subject: | Re: Over rpms Oxy3 |
Hello, if you only changed radio and nothing else, then the only problem could be in the radio. If you will set it perfectly identically as your old radio, it will work in the same way. This mean that something is different in your current settings. No changes in Spirit unit are needed. |
Page 1 of 1 | All times are UTC + 1 hour |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |