| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| Servo wiring and BT module https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=403 |
Page 1 of 1 |
| Author: | Nitro Head [ Fri 02. Jan 2015 0:24:58 ] |
| Post subject: | Servo wiring and BT module |
Attachment: image.jpg [ 188.36 KiB | Viewed 998 times ] I am fitting the spirit to an Align Heli, their naming convention is. Elev servo at rear Pitch on left front Ail on right front Is this the same definition as your manual for aileron/pitch servo? Does the spirit actually care about which is the ail or pitch servo? Also I am connecting the Bluetooth module to the Spirit can I use this with the windows software or is it only for the Android software? Thanks, |
|
| Author: | ZeXx86 [ Fri 02. Jan 2015 8:16:46 ] |
| Post subject: | Re: Servo wiring and BT module |
Hi, for Spirit, it is: CH1 - Aileron CH2 - Elevator CH3 - Pitch But in Spirit, you can even swap Aileron/Pitch to achieve minimum reversing - so it can be little bit easier in initial settings. If you have some troubles you can ask me anytime. |
|
| Author: | Nitro Head [ Fri 02. Jan 2015 13:17:36 ] |
| Post subject: | BT module |
Thanks for the reply it good to know that the spirit allows swap of the pit and aileron. Regarding the BT module does this work ok with the windows software? Thanks. |
|
| Author: | ZeXx86 [ Fri 02. Jan 2015 13:39:19 ] |
| Post subject: | Re: Servo wiring and BT module |
It is supposed for Android only at the moment. But there are some people that are running Windows app successfully yet it is not recommended. |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|