Spirit System
https://www.spirit-system.com/phpBB3/

Wiring question
https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=398
Page 1 of 1

Author:  Toshhairyfool [ Fri 26. Dec 2014 21:15:45 ]
Post subject:  Wiring question

Hello all
Looking to wire my first Spirt and wanted to double check I get it right.
I will be using two Spektrum satalites, a bug, a bec and a Castle ice 100. I have removed the White, red and black wire from the castle esc and put the Orange signal wire in with the red and black wire plug from the bec which will go into the Aux channel. I will use a y lead in the Rud channel one side the satalite adapter wire the other the bug. Does this sound correct?
Also on my dx8 in the gyro tab I have +60 0 -60 is that a good starting point?
Many thanks for for help

Author:  ZeXx86 [ Fri 26. Dec 2014 21:29:48 ]
Post subject:  Re: Wiring question

Hello,

it is possible it will work, but your ESC could require to share Ground signal with your BEC. But in case you are powering BEC with same battery as your ESC, then it should work.

I recommend to use Gyro gains +55% +65% +75% to start with.

Author:  Toshhairyfool [ Fri 26. Dec 2014 22:01:10 ]
Post subject:  Re: Wiring question

Thanks for the quick reply, yes the esc and bec are powered of the same 6s lipo

Page 1 of 1 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/