Spirit System
https://www.spirit-system.com/phpBB3/

Mounting Geolink on Soxos Strike 7
https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=3910		 Page 1 of 1
Author:  augur [ Sun 26. Apr 2020 9:45:00 ]
Post subject:  Mounting Geolink on Soxos Strike 7
Hi,

I read the manual from the Geolink I got new and according the mounting specification I cannot mount it somewhere on my Soxos Strike 7.

I thought about mounting it on the platform on top of the servos but it is too near to the servos. On the tailboom it is too near to the magnets of the canopy (should be 30cm away from it). So what is the best of this bad mounting points? Tailboom or the platform?

Cheers,
Nils

Attachments:
E7263777-3E1A-48C6-A9C1-14BF7F1DC872.jpeg
E7263777-3E1A-48C6-A9C1-14BF7F1DC872.jpeg [ 128.68 KiB | Viewed 211 times ]
Author:  mb-1953 [ Sun 26. Apr 2020 13:40:11 ]
Post subject:  Re: Mounting Geolink on Soxos Strike 7
The canopy magnets are very strong on the Strike 7 and will affect the geolink. I had to remove the rear and center magnets on my canopy to achieve same heading direction with or without the canopy on.
Author:  augur [ Tue 28. Apr 2020 11:46:01 ]
Post subject:  Re: Mounting Geolink on Soxos Strike 7
How did you mount it? A am planning to use the first mount of the tail it seems perfect. But I am not sure to use a CFK plate or a 3D printed one. Is CFK plate fine and does not interfere with GPS if I fly inverted?

Cheers
Nils
Page 1 of 1 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/