| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| What's wrong with V3.0 ? ? https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=3865 |
Page 1 of 1 |
| Author: | misdermeanor [ Tue 14. Apr 2020 17:54:33 ] |
| Post subject: | What's wrong with V3.0 ? ? |
Hey guys, I was excited to see an update to V3.0 yesterday, so I duly went through the procedure for downloading and updating the firmware and software, everything seemed good. This morning, the sun was shining, I hadn't caught 'Covid19' the previous night, and all was I thought good ! Imagine my surprise when, after starting my Trex700 gasser and warming it up, I took off and engaged' stabilisation. The leading edge of the swashplate tilted up 10 or 15 degrees and tilted to the left almost as much, I almost crashed ! ! The bas setup is exactly the same, all that changed was the software/ firmware, what ever i tried i wasn't able to adjust this effect out, as soon as stabilisation was engaged the swash tilts. So I have had to de-install V3.0 and reinstall V2.8 which I know to be safe. BE CAREFULL UPDATING, Yours, nervously. Steve E |
|
| Author: | ZeXx86 [ Tue 14. Apr 2020 18:02:42 ] |
| Post subject: | Re: What's wrong with V3.0 ? ? |
Hello, there is nothing wrong. It is important to check everything always after update, before flying. Please check this thread for solution: viewtopic.php?f=20&t=3859 |
|
| Author: | misdermeanor [ Tue 14. Apr 2020 18:30:09 ] |
| Post subject: | Re: What's wrong with V3.0 ? ? |
Please, accept my apologies, there is nothing wrong with the programs, as suggested I calibrated my geolink now all seems good, Thanks, as ever, for the quickest of technical help in the rc business ! Regards, Steve E |
|
| Author: | ZeXx86 [ Tue 14. Apr 2020 18:35:48 ] |
| Post subject: | Re: What's wrong with V3.0 ? ? |
You are welcome. Please check this page: http://manual.spirit-system.com/index.p ... ise_Rescue There is new section "Bench testing" that is describing how to verify if everything is OK right before flight. |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|