| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| Frsky integration cable https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=3783 |
Page 1 of 1 |
| Author: | jjuk [ Wed 19. Feb 2020 2:48:46 ] |
| Post subject: | Frsky integration cable |
The frsky integration cable has power, ground and signal cables that connect to the receiver s.port. Why is a second power connection required? The receiver is also powered from the sbus cable. My receiver only has one power connector. R-xsr. |
|
| Author: | ZeXx86 [ Wed 19. Feb 2020 14:38:48 ] |
| Post subject: | Re: Frsky integration cable |
FrSky integration cable can be powered only from side of the receiver. Unit itself is not powering the cable, because there is no power at the SYS port. Since also SBUS cable must be connected for channel transmission it is powered in this way. R-XSR require special connection - we have scheme here in the forum for this receiver. |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|