| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| Stabilization https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=3755 |
Page 1 of 1 |
| Author: | kellyvb [ Wed 05. Feb 2020 5:10:48 ] |
| Post subject: | Stabilization |
Have a Blade 500 heli and don't really understand how to setup the stabilization. I'm using a Taranis X9D + radio. This is how i have the software setup. On the Inputs tab (In OpenTX) Input 6 -CH5: Gyr Weight -70 Switch SB Back Gyr Weight 70 Switch SB Forward On the Mix Tab CH5 Gyr (+100) No Trim I have no clue if this is correct or how to even test it. Any help is MUCH appreciated In the Spirit Unit I have stabil set on and Coaxial and the channels screen set to F: Stabil and channel 7. When I hit my SG switch forward stabil function says on, When its back is says channel configured. The Channel 5 always shows +3% and never changes with the switch movements (SB or SG |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|