| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| swashplate moving in wrong direction https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=3738 |
Page 1 of 1 |
| Author: | rc10tc [ Sun 26. Jan 2020 3:48:08 ] |
| Post subject: | swashplate moving in wrong direction |
I have set up my spirit 2 system for the first time on my trex 600. Everything is moving correctly except the swashplate. When I tilt heli to the left or right, the swash plate does not move correct direction. What setting do I need to change to make it move correctly? This is the second spirit 2 system that I have set up. The first one I set up on a trex 550e. And I had no issues. The only difference is that on the 600 the system is mounted in the front with the servo wire inputs are facing forward. I set it up forward on the computer set up also. So I'm not sure why the swash is moving the wrong direction. |
|
| Author: | morrchew [ Sun 26. Jan 2020 7:09:27 ] |
| Post subject: | Re: swashplate moving in wrong direction |
Double check that you have the cyclic and pitch servos set up correctly which would be the left and right servo. |
|
| Author: | rc10tc [ Sun 26. Jan 2020 19:53:05 ] |
| Post subject: | Re: swashplate moving in wrong direction |
ok, got it to work. Thanks. I thought I could just unplug and swap ch 1 and ch 3 ,but I had to re-do whole set up. So now it works. Thanks! |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|