Spirit System :: View topic - Very high values in OpenTX Telemetry

Spirit System https://www.spirit-system.com/phpBB3/

Very high values in OpenTX Telemetry https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=3735	Page 1 of 2

Author:	ferdey [ Thu 23. Jan 2020 7:34:40 ]
Post subject:	Very high values in OpenTX Telemetry
Hi, Just asking this in here, probably not a Spirit issue at all, just checking? Maybe related to OpenTX v2.3.5, on a Taranis X9D+ with a Hobbywing 200A ESC and Spirit Pro. Suddenly I see random very high numbers in Telemetry, such as for ESC Temp max and RPM min (looks like Int32 Max to me). Any suggestions where to look? Cheers!

Author:	ZeXx86 [ Thu 23. Jan 2020 8:59:07 ]
Post subject:	Re: Very high values in OpenTX Telemetry
Hi, are you able to downgrade OpenTX firmware and compare the results?

Author:

Mikej [ Thu 23. Jan 2020 12:03:16 ]

Post subject:

Re: Very high values in OpenTX Telemetry

I have these also - but in my case for Fuel +, which I was using to see maximum vibes

This is with OpenTx 2.3.5, the latest V2.0.1 ACCST firmware using micro Spirit with HW integration and OpenTx integration (2.7.1 version). I foolishly changed the ACCST firmware, Changed the OpenTx firmware and added Fuel+ to my telemetry screen all on the same day so I don't know which one introduced the problem

Attachments:

Pic 1.jpg [ 83.2 KiB | Viewed 562 times ]

Fuel.jpg [ 98.82 KiB | Viewed 562 times ]

Author:	ferdey [ Thu 23. Jan 2020 19:41:48 ]
Post subject:	Re: Very high values in OpenTX Telemetry
ZeXx86 wrote: Hi, are you able to downgrade OpenTX firmware and compare the results? Thanks, yes, I think I will do this. It is looking like an ACCST D16 2.0.1 firmware issue.

Author:	ferdey [ Thu 23. Jan 2020 19:43:03 ]
Post subject:	Re: Very high values in OpenTX Telemetry
Mikej wrote: I have these also - but in my case for Fuel +, which I was using to see maximum vibes This is with OpenTx 2.3.5, the latest V2.0.1 ACCST firmware using micro Spirit with HW integration and OpenTx integration (2.7.1 version). I foolishly changed the ACCST firmware, Changed the OpenTx firmware and added Fuel+ to my telemetry screen all on the same day so I don't know which one introduced the problem Yep, that's what I am seeing exactly, I will go back to v1 ACCST D16 firmware I think.

Author:	ferdey [ Fri 24. Jan 2020 5:47:11 ]
Post subject:	Re: Very high values in OpenTX Telemetry
I've rolled back to the latest v1 ACCST firmware on my tx and rxs and so far it has not happened again, thanks (although still running OpenTX v2.3.5)

Author:	Mikej [ Fri 24. Jan 2020 17:02:46 ]
Post subject:	Re: Very high values in OpenTX Telemetry
Thanks for updating on this - I've only seen it on Fuel+, but I also get a lot of "Sensor Lost" warnings with the V2.0.1, and Fuel+ will keep the weird value as it is a maximum field whereas the other sensors will get overwritten.

Author:	ferdey [ Fri 24. Jan 2020 21:00:55 ]
Post subject:	Re: Very high values in OpenTX Telemetry
Mikej wrote: Thanks for updating on this - I've only seen it on Fuel+, but I also get a lot of "Sensor Lost" warnings with the V2.0.1, and Fuel+ will keep the weird value as it is a maximum field whereas the other sensors will get overwritten. No worries I was midly worried when I got an ESC Temp warning 12 seconds into a flight and I glanced down and saw the ESC temp was around 62 million degrees C lol

Author:	Mikej [ Sun 26. Jan 2020 12:27:56 ]
Post subject:	Re: Very high values in OpenTX Telemetry
ferdey wrote: Mikej wrote: Thanks for updating on this - I've only seen it on Fuel+, but I also get a lot of "Sensor Lost" warnings with the V2.0.1, and Fuel+ will keep the weird value as it is a maximum field whereas the other sensors will get overwritten. No worries I was midly worried when I got an ESC Temp warning 12 seconds into a flight and I glanced down and saw the ESC temp was around 62 million degrees C lol

Author:	Mikej [ Sun 26. Jan 2020 14:54:42 ]
Post subject:	Re: Very high values in OpenTX Telemetry
Do you think that I need to worry about my 83,932,936% vibes - bad blade tracking perhaps??

Page 1 of 2	All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/